Choosing PTFE Ball For AODD Pump
HEMSUN buyers and engineers use this note when specifying Choosing PTFE Ball For AODD Pump for industrial PTFE parts, powder presses, or related tooling.
What this page covers
- How Choosing PTFE Ball For AODD Pump affects material grade, tolerance, tonnage, or tooling cost
- What to put on an RFQ so HEMSUN can respond with size, grade, or machine scope
- Where HEMSUN ENGG. INDUSTRIES supports prototypes, production lots, and worldwide packing from Dahegam, Gandhinagar, Gujarat, India
Buyer checklist
- Duty — media, temperature, pressure, and continuous vs intermittent service.
- Geometry — critical dimensions, tolerance grade, solid vs hollow / multi-level.
- Material or machine route — virgin/filled PTFE, engineering plastic, elastomer, ceramic, PM, or a dedicated press cell.
- Volume — sample, pilot, or recurring OEM supply (drives tooling and automation).
- Destination — domestic delivery or export documentation needs.
How HEMSUN supports the next step
Send a drawing, size list, press tonnage target, or sample to contact HEMSUN. We confirm manufacturability, quote samples or production, and supply material certificates / export docs for qualified orders.
Related HEMSUN pages
Next steps for buyers
When you have reviewed this choosing ptfe ball for aodd pump guide, send your drawing, material grade, and annual quantity to HEMSUN ENGG. INDUSTRIES for a scoped quote from our Dahegam, Gujarat works. Domestic and export programmes are supported with IEC-registered paperwork, material certificates, and packing suitable for air or sea freight. Contact info@hemsun.com or sales@hemsun.com with destination port and inspection requirements where applicable.
Technical specifications, testing and engineering data
HEMSUN ENGG. INDUSTRIES manufactures and engineers high-precision solutions for choosing ptfe ball for aodd pump at our Dahegam, Gujarat facility. Operating since 1994, our manufacturing processes combine modern CNC machining centers, precision hydraulic compression presses, and continuous CMM inspection.
Comprehensive Material & Mechanical Property Matrix
| Engineering Property | Virgin PTFE Standard | 25% Glass-Filled PTFE | 33% Carbon-Filled PTFE | 60% Bronze-Filled PTFE | Test Standard |
|---|---|---|---|---|---|
| Specific Gravity | 2.14 – 2.18 g/cm³ | 2.22 – 2.26 g/cm³ | 2.05 – 2.15 g/cm³ | 3.80 – 4.00 g/cm³ | ASTM D792 |
| Tensile Strength | 20 – 35 MPa | 14 – 22 MPa | 12 – 18 MPa | 15 – 24 MPa | ASTM D4894 |
| Elongation at Break | 250% – 450% | 150% – 250% | 80% – 160% | 100% – 200% | ASTM D4894 |
| Compressive Strength (1% strain) | 4.0 – 5.5 MPa | 7.5 – 9.0 MPa | 8.0 – 10.5 MPa | 12.0 – 15.0 MPa | ASTM D695 |
| Deformation Under Load (14 MPa, 24h) | 12% – 15% | 4% – 6% | 3.5% – 5% | 2.5% – 4% | ASTM D621 |
| Shore D Hardness | 50 – 55 Shore D | 58 – 64 Shore D | 60 – 66 Shore D | 65 – 72 Shore D | ASTM D2240 |
| Dynamic Friction Coeff. (vs Steel) | 0.05 – 0.08 | 0.10 – 0.14 | 0.08 – 0.12 | 0.12 – 0.16 | ASTM D1894 |
| Thermal Conductivity | 0.25 W/m·K | 0.40 W/m·K | 0.55 W/m·K | 0.85 W/m·K | ASTM C177 |
Quality Assurance, Testing Protocols & Traceability
- Dimensional CMM Profilometry: Critical diameters, concentricity, and sphericity are verified on coordinate measuring machines against drawing nominals.
- Dielectric Breakdown Voltage Testing: High-voltage spark testing screens moulded parts for micro-voids, pinholes, and internal conductive inclusions before dispatch.
- Specific Gravity & Density Verification: Water displacement density checks according to ASTM D792 ensure full preform compaction and complete oven gel sintering.
- Certificate of Compliance & MTR: Every dispatch includes mill test certificates confirming raw resin lot traceability, filler content, and tensile/elongation values.
Installation, Machining & Maintenance Recommendations
- Tooling Geometry for Machining: Use polished tungsten carbide (C2 grade) or polycrystalline diamond (PCD) inserts with high positive top rake angles (15° to 25°) and sharp cutting edges to prevent material smearing.
- Feed & Speed Rates: High spindle speeds (200 to 450 m/min) combined with moderate feed rates (0.05 to 0.15 mm/rev) ensure mirror surface finishes without localized frictional heating.
- Coolant Application: Water-soluble synthetic coolants or clean air blast prevent thermal expansion during high-speed CNC turning and milling passes.