PM Cam Press

How this press is built

Engineered for high repeatability, the PM Cam Press provides 688 Ton of compaction force for pm cam press components components up to Engineered to client drawing envelope (Build HSE-625). Digital PLC timers manage a 104-second consolidation dwell, after which proportional relief valves exhaust pressure gradually to ensure safe part ejection without delamination.

Material behaviour under compaction

Engineered to handle granular suspension resins and filled grades of sintered metal powder metallurgy alloy, the cylinder stroke and platen guidance maintain strict parallelism. Uniform uniaxial pressure distribution creates isotropic workpieces with high tensile strength and void-free dielectric resistance following oven processing.

Tooling and die design

Precision-ground guidance columns paired with bronze sleeve bushings guarantee alignment repeatability within ±0.01 mm. Tooling sets for pm cam press components are engineered with air bleeding clearances to prevent powder blow-out during rapid compaction strokes.

Sizing and machine selection

Our application engineers assist in configuring the PM Cam Press by determining total projected mould area and compaction tonnage (688 Ton capacity). Send your component technical specifications for an itemized commercial and technical proposal within 24 hours.

Quality checks and inspection

Factory validation encompasses continuous hydraulic pressure holding tests, platen deflection measurement under tonnage, and witness trial runs using customer-supplied tooling.

Installation and commissioning

Our commissioning package includes complete technical manuals, electrical wiring diagrams, hydraulic schematics, and on-site support by factory engineers to ensure smooth machine startup and comprehensive operator training.

Export packing and lead time

Fully export-ready, the unit complies with international electrical standards (380V/60Hz) and features seaworthy timber crating with internal rust-inhibiting foil for transit via Mundra or Nhava Sheva container terminals.

Maintenance and spare parts

Preventative maintenance covers hydraulic oil condition monitoring, regular guide pillar lubrication, and annual seal checks. Standardized components ensure straightforward servicing and local spare availability.

Safety and guarding

Equipment safety features comprise infrared perimeter sensors, two-hand anti-tie-down controls, hydraulic overpressure relief valves, and panel-mounted emergency stop buttons.

Specifications