Automatic Powder Feeding System
Automatic Powder Feeding System — Production Specifications, Cavity Tooling & Press Sizing
The Automatic Powder Feeding System (Reference HSE-741) by HEMSUN ENGG. INDUSTRIES is built for high-performance compaction of automatic powder feeding system components. Features rigid platen guidance, variable-displacement hydraulics, and CMM-inspected tooling for OEM factories.
Applications
- Serial compaction and forming of automatic powder feeding system components for industrial processors (Workstation Ref: APP-6141).
- Integrated die-set tooling for automatic powder feeding system components with automated powder cavity charging and synchronized bottom ejection.
- Programmable density management on generic-hydraulic compounds with controlled pressure dwell cycles from 26s to 3min.
- Export-compliant production line equipped with multi-voltage electrical cabinet (380V/60Hz) and complete FAT documentation.
How this press is built
Custom-built for high-yield manufacturing of automatic powder feeding system components, this Automatic Powder Feeding System installation delivers 326 Ton of uniaxial compressive force to form Engineered to client drawing envelope (Build HSE-278) workpieces. The hydraulic power pack features high-response proportional cartridge valves that execute a rapid-advance stroke, micro-speed consolidation, and a programmed 66-second dwell curve. Regulated pressure decay guarantees stress-free preform release, while an auxiliary bottom hydraulic cylinder applies smooth ejection force to raise the finished green part without edge chipping or cavity wall friction marks.
Material behaviour under compaction
Configured for high-grade engineered industrial material processing, the press delivers synchronized compaction that eliminates density gradients. Rigid bolster plates resist deflection, allowing preforms to process uniformly without axial distortion.
Tooling and die design
Equipped with heavy-duty bolster plates with standardized T-slot spacing, the press accepts quick-change die assemblies. Mirror-polished die cavities (Ra ≤ 0.15 µm) and precision lower punch sleeves ensure effortless part release for automatic powder feeding system components.
Sizing and machine selection
Our application engineers assist in configuring the Automatic Powder Feeding System by determining total projected mould area and compaction tonnage (326 Ton capacity). Send your component technical specifications for an itemized commercial and technical proposal within 24 hours.
Quality checks and inspection
We execute thorough quality checks on every machine: 8-hour full-load hydraulic cycling, electrical panel dielectric safety testing, and dimensional inspection of trial-pressed components.
Installation and commissioning
We provide full technical documentation including electrical wiring layouts, hydraulic piping plans, foundation guides, and maintenance manuals. Factory service technicians travel globally for on-site positioning, oil filling, and operator training.
Export packing and lead time
We provide full export handling with certified seaworthy timber packing, rust-inhibiting VCI film, destination-specific electricals (380V/60Hz), and complete shipping documentation.
Maintenance and spare parts
Maintenance guidelines recommend hydraulic oil replacement every 2,000 hours (ISO VG 68), daily column greasing through centralized lubrication ports, and annual check of hydraulic valves. Standard seal replacement kits are maintained in factory inventory for immediate dispatch.
Safety and guarding
Equipment safety features comprise infrared perimeter sensors, two-hand anti-tie-down controls, hydraulic overpressure relief valves, and panel-mounted emergency stop buttons.
Specifications
| Property | Value |
|---|---|
| Machine Series & Model | Automatic Powder Feeding System (Series HSE-741) |
| Rated Tonnage Capacity | 50 Ton (Double-Action 4-Pillar Compaction Press) |
| Target Part Size Envelope | Engineered to client drawing envelope (Build HSE-278) |
| Platen Bolster Dimensions | 360 × 360 mm ground steel bolster with T-slots |
| Daylight & Ram Stroke | 680 mm daylight / 520 mm main ram stroke |
| Specific Compaction Pressure | 3,000–4,500 psi (300–450 kg/cm²) |
| Pressure Dwell Control Band | 30 seconds to 3 minutes programmable pressure dwell |
| Main Motor & Electricals | 15 HP 3-Phase 415V (Dual-pump regenerative circuit) |
| Hydraulic Reservoir Volume | 160 Liters ISO VG 68 hydraulic reservoir |
| Overall Machine Dimensions | 1650 × 1850 × 2650 mm |
| Automation & PLC Architecture | Schneider Electric PLC with 10-Inch Color Touchscreen & Recipe Bank |
| Manufacturing & Testing Origin | Fabricated, Assembled & Tested at Dahegam, Gandhinagar, Gujarat, India |
Related Machinery, Tooling & Technical Guides
Category & Machinery Hubs
Engineering Process Guides
Frequently Asked Questions
What is the Automatic Powder Feeding System used for?
The Automatic Powder Feeding System from HEMSUN ENGG. INDUSTRIES is engineered for Serial compaction and forming of automatic powder feeding system components for industrial processors (Workstation Ref: APP-6141).; Integrated die-set tooling for automatic powder feeding system components with automated powder cavity charging and synchronized bottom ejection.; Programmable density management on generic-hydraulic compounds with controlled pressure dwell cycles from 26s to 3min.. Share your part drawing, powder type, and annual volume so we can match tonnage, cavity layout, and automation.
Can HEMSUN customize the Automatic Powder Feeding System tonnage and controls?
Tonnage options include 50 Ton (Double-Action 4-Pillar Compaction Press). Control packages include 30 seconds to 3 minutes programmable pressure dwell. Our application engineers assist in configuring the Automatic Powder Feeding System by determining total projected mould area and compaction tonnage (326 Ton capacity). Send your…
Do you install and train operators for the Automatic Powder Feeding System?
Yes. Installation, commissioning, and operator training are available for domestic and export shipments. Fabricated, Assembled & Tested at Dahegam, Gandhinagar, Gujarat, India. Export documentation (commercial invoice, packing list, certificate of origin) is provided for qualified orders.
Related
Related Machines
Get Started
Ready to Put Your Drawing Into Production?
Send your specification and our engineering team will scope your PTFE components, hydraulic machine, or turnkey project — no obligation.
- Quote response within 24 hours
- Built entirely in our own facility
- Export documentation included
Request a Quote
Tell us what you need — material, drawing, or sample — and we'll follow up with pricing and lead time.
Contact HEMSUN +91-9979593687 32+ Years
32+ Countries
IEC Registered